36 CKE-BA-e-2132
13.2 Data transfer functions
13.2.1 Summing mode <sum>
This function enables to add individual weighing values to the total memory once the button
is pressed and to print them once connected to an optional printer.
Function enabling:
In the setup menu, display the <Print sum> menu item and confirm, pressing
.
Use the navigation buttons to choose the setting <on> and confirm by pressing .
To leave the menu, press the navigation button several times.
Preliminary condition: Menu setting <prmode
manual
on>
Summing the weighed material:
Whenever required, place an empty container on the scale and tare it.
Place the first weighed material. Wait until the stabilization indicator is displayed ( ),
and press PRINT. First <sum1> symbol and then the current weight value will be dis-
played. The weight value will be saved and sent to the printer. The ∑ symbol will be dis-
played. Remove the weighed material.
Place the second weighed material. Wait until the stabilization indicator is displayed (
), and press PRINT. First <sum2> symbol and then the current weight value will
be displayed. The weight value will be saved and sent to the printer. Remove the
weighed material.
Add the weight of another weighed material to the total, as specified above.
This process may be repeated at any frequency until you reach the scale weighing range.
Displaying and printing the “Total”
Press and hold the PRINT button. The number of weighing actions and the total
weight will be displayed.
The total memory will be deleted; the [∑] symbol will go off.
To Next Page
Loading...
Need help?
General
