Lubrication and Service - Section 40 7/11 OM4056
Page 40-8
50 HOUR LUBRICATION AND MAINTENANCE CHECKS
* These checks are required only after the initial 50 hours of operation, such as the commissioning of a new
truck or after installing a new or rebuilt component.
100 HOUR LUBRICATION AND MAINTENANCE CHECKS
* This check is required only after the initial 100 hours of operation, such as the commissioning of a new truck
or after installing a new or rebuilt component.
250 HOUR LUBRICATION AND MAINTENANCE CHECKS
* This check is required only after the initial 250 hours of operation, such as the commissioning of a new truck
or after installing a new or rebuilt component.
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
*1. FUEL FILTERS - Replace the fuel filters. Refer to the
engine operation and maintenance manual for filter
replacement instructions.
*2. HYDRAULIC SYSTEM FILTERS - Replace the filter
elements. Check the oil level. Add oil as necessary.
(Lube Key “B”)
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
*1. HYDRAULIC SYSTEM FILTERS - Replace the filter
elements. Check the oil level. Add oil as necessary.
(Lube Key “B”)
Truck Serial Number______________________ Site Unit Number_______________ Date_______________
Hourmeter_____________ Name of Service Technician___________________________________
TASK COMMENTS CHECKED INITIALS
*1. HYDRAULIC SYSTEM FILTERS - Replace the filter
elements. Check the oil level. Add oil as necessary.
(Lube Key “B”)
To Next Page
Loading...
Need help?
General
