Radio / CD Player - Section 70 03/10 OM7006
Page 70-2
Display
The receiver will display the time of day when it is off.
Momentarily pressing the TMSET/DSPL (3) button
when the receiver is on allows to toggle between dis-
plays.
When the receiver is set to AM, FM1, FM2, FM3 or
WX, the display will toggle between the frequency
and time of day.
When in the CD mode, the display will toggle
between track number and elapsed time, and time of
day.
When playing an MP3 disc, the display will toggle
between the ID3 tag (song title, artist and album title)
and time of day.
Setting a Default Display
1. Press the BAND (2) button to enter the mode to
set a default display.
2. Press and hold the TMSET/DSPL button for 2
seconds until the hours digits flash.
3. Press push button (6) until the desired display
appears.
After 5 seconds of inactivity, the selected default will
be displayed.
Adjusting the Brightness of the Display
If the dash dimmer does not control the brightness of
the receiver display or the receiver is operating in
One-Hour Timer mode, press and hold the SCAN/
DIM (9) button until DIM and the brightness level
appear on the display. Rotate the AUDIO knob clock-
wise to increase the brightness of the receiver dis-
play and counter-clockwise to decrease it.
Auxiliary Mode
When in Auxiliary mode, the radio can play an audio
source from an iPOD or an MP3 player that is con-
nected via the auxiliary radio lines.
To enable the Auxiliary mode:
• Press and hold the BAND (2) button for at least 2
seconds until the display shows EXTERNAL
AUDIO.
To disable Auxiliary mode:
• Press and hold the BAND (2) button for at least 2
seconds until the radio reverts to the previous
mode.
Adjusting the Receiver Settings
To adjust the Volume, Bass, Treble, Fade, Balance,
Seek Sensitivity and Speakers, press and release
the ON/AUDIO (5) knob repeatedly until the desired
feature appears on the display.
VOLUME: Rotate the AUDIO knob clockwise to
increase the volume and counter-clockwise to
decrease it. The display will show VOL and the vol-
ume level.
BASS: Press the AUDIO knob until BASS and the
current setting appears on the display. Rotate the
knob clockwise to increase the bass sound and
counter-clockwise to decrease it.
TREBLE: Press the AUDIO knob until TREBLE and
the current setting appears. Rotate the knob clock-
wise to increase the treble sounds and counter-
clockwise to decrease it.
FADE: Press the AUDIO knob until FADE and the
current setting appears on the display. Rotate the
knob clockwise to move the sound to the front speak-
ers and counter-clockwise to move the sound to the
rear.
BALANCE: Press the AUDIO knob until BALANCE
and the level appear. Rotate the knob clockwise to
move the sound to the right speakers and counter-
clockwise to move the sound to the left.
To Next Page
Loading...
Need help?
General
