Kramer VM-218DTxr User Manual

Kramer Electronics Ltd.
VM-218DTxr, VM-218DT – Connecting the HDMI/HDBT Switcher DA
9
Ethernet, via IP control device (for example, a laptop) and/or an IP room controller (for
example, Kramer SL-240C).
8. Connect the power adapter to the VM-218DTxr and to the mains electricity (not
shown in Figure 3).
9. Connect signal extensions (see Extending Control Signals on page 10).
The USB connector and power cord are not shown in Figure 3.
Connecting VM-218DT
Figure 4: Connecting to VM-218DT
To connect the VM-218DT as illustrated in the example in Figure 4:
1. Connect an HDMI source (for example, a Blu-ray player) to the IN 1 HDMI connector .
2. Connect an HDBT transmitter (for example, Kramer TP-580T) to the IN 2 HDBT RJ-45
connector .
3. Connect the OUT 1 HDMI connector to an HDMI acceptor (for example, a display).
4. Connect the 8 OUT HDBT RJ-45 connectors (2 to 9) to up to 8 HDBT receivers (for
example, Kramer TP-580R receivers).
5. Connect the AUDIO OUT 3.5mm mini jack to an analog audio acceptor (for example,
Kramer Tavor 6-O speakers).
6. Connect the RS-232 terminal block connector to a serial control device (for example,
a laptop) to control the VM-218DT.
7. Connect the Ethernet RJ-45 port to the Ethernet LAN to control the VM-218DT and
its peripheral devices and/or to a room controller (for example, Kramer
SL-240C).
8. Connect the power adapter to the VM-218DT and to the mains electricity (not shown
in Figure 4).

Kramer VM-218DTxr Specifications

General

Brand	Kramer
Model	VM-218DTxr
Category	Switch
Language	English