KTM 1290 Super Adventure S 2018 User Manual

COMBINATION INSTRUMENT 7
111
Press and
hold the SET
button for 3 -
5 seconds.
Activation of the motorcycle traction control.
7.27.29 MTC+MSR (optional)
F01305-01
Condition
• The motorcycle is stationary.
• Cruise control system function deactivated.
– Press the SET button when the menu is closed.
– Press the UP or DOWN button until Motorcycle is marked. Press
the SET button to open the menu.
– Press the UP or DOWN button until MTC+MSR is marked. Press
the SET button to open the menu.
– Activate the menu item using the UP or DOWN button.
– Switch the MTC+MSR on or off by pressing the SET button.
Info
Do not open the throttle when switching on or off.
When the ABS is switched off or the Ride Mode Offroad
is active, the MSR is not active.
After the ignition is switched on, the motorcycle
traction control and engine traction torque control are
enabled again.

KTM 1290 Super Adventure S 2018 Specifications

General

Brand	KTM
Model	1290 Super Adventure S 2018
Category	Motorcycle
Language	English