13 SERVICE WORK ON THE CHASSIS
188
13.9 Checking the chain tension
Warning
Danger of accidents Incorrect chain tension damages components and results in accidents.
If the chain is tensioned too much, the chain, engine sprocket, rear sprocket, transmission and rear
wheel bearings wear more quickly. Some components may break if overloaded.
If the chain is too loose, the chain may fall off the engine sprocket or the rear sprocket. As a result, the
rear wheel locks or the engine will be damaged.
– Check the chain tension regularly.
– Set the chain tension in accordance with the specification.
Preparatory work
– Raise the vehicle with the center stand. ( p. 181)
401664-10
Main work
– Shift the transmission to idle .
– In the area in front of the chain guide, push the chain up and
determine chain tension
A
.
Info
The upper part of the chain
B
must be taut.
Chain wear is not always even, so you should repeat
this measurement at different chain positions.
To Next Page
Loading...
Need help?
General
