ERGONOMICS 8
131
Finishing work
– Mount the passenger seat. ( p. 183)
8.2 Handlebar position
401666-11
The holes on the handlebar support are placed at a distance of
A
from the center.
Hole distance
A
3.5 mm (0.138 in)
The handlebar can be mounted in two different positions. In this
way, the handlebar can be mounted in the position that is most
comfortable for the rider.
8.3 Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a
result.
– Change the handlebar if the handlebar is damaged or bent.
To Next Page
Loading...
Need help?
General
