BRAKE SYSTEM 14
217
14.1 Antilock brake system (ABS)
H02020-01
The ABS unit
1
, which consists of a hydraulic unit, brake elec-
tronics control unit, and return pump, is installed under the seat.
One wheel speed sensor
2
is located in each case on the front
and the rear wheel.
Warning
Danger of accidents Changes to the vehicle impair the
function of the ABS.
– Only allow the rear wheel to spin with the front brake
applied away from public road traffic if the ABS is
switched off.
– Do not make any changes to the suspension travel.
– Only use spare parts on the brake system which have
been approved and recommended by KTM.
– Only use tires/wheels approved by KTM with the corre-
sponding speed index.
– Maintain the specified tire air pressure.
– Service work and repairs must be performed profes-
sionally. (Your authorized KTM workshop will be glad
to help.)
ABS is a safety system that prevents locking of the wheels when
driving straight ahead without the influence of lateral forces.
To Next Page
Loading...
Need help?
General
