15 WHEELS, TIRES
242
Guideline
In order for the rear wheel to be correctly aligned, the mark-
ings on the left and right chain adjusters must be in the
same position relative to reference markings
B
.
–
Tighten nut
5
.
Guideline
Nut, rear wheel
spindle
M25x1.5 90 Nm (66.4 lbf ft)
Thread greased
V00772-12
–
Position wheel speed sensor
6
in the drill hole.
–
Mount and tighten screw
7
.
Guideline
Remaining chassis
screws
M6 10 Nm (7.4 lbf ft)
– Operate the foot brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point.
To Next Page
Loading...
Need help?
General
