KTM 1290 Super Adventure S 2018 User Manual

BRAKE SYSTEM 14
229
Info
Never use DOT 5 brake fluid. It is silicone-based and purple in color. Oil seals and brake lines are not
designed for DOT 5 brake fluid.
Avoid contact between brake fluid and painted parts. Brake fluid attacks paint.
Only use clean brake fluid from a sealed container.
Preparatory work
– Raise the vehicle with the center stand. ( p. 181)
– Check the rear brake linings. ( p. 230)
V00765-10
Main work
–
Remove screw cap
1
with membrane
2
.
–
Add brake fluid up to MAX marking
A
.
Brake fluid DOT 4 / DOT 5.1 ( p. 326)
–
Mount and tighten screw cap
1
with membrane
2
.
Info
Clean up overflowed or spilled brake fluid immediately
with water.

KTM 1290 Super Adventure S 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Final Drive	Chain
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
Wheelbase	1560 mm
Fuel Capacity	23 liters
Dry Weight	215 kg
Power	160 hp (118 kW) @ 8750 rpm
Torque	140 Nm @ 6750 rpm
Front Brake	2 x 320 mm discs, 4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Traction Control	MTC (Motorcycle Traction Control)
Seat Height	860/875 mm
Tires Front	120/70 R19
Tires Rear	170/60 R17