KTM 1290 Super Adventure S 2018 User Manual

WHEELS, TIRES 15
239
V00775-10
–
Pull out wheel spindle
5
far enough to allow the rear wheel
to be pushed forward.
– Push the rear wheel forward as far as possible. Take the
chain off of the rear sprocket and place it on chain sprocket
guard
6
.
Warning
Danger of accidents Reduced braking effect caused by
damaged brake discs.
– Always lay the wheel down in such a way that the
brake discs are not damaged.
– Holding the rear wheel, withdraw the wheel spindle. Take the
rear wheel out of the swingarm.
Info
Do not operate the foot brake when the rear wheel is
removed.
–
Remove spacer
7
.

KTM 1290 Super Adventure S 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Final Drive	Chain
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
Wheelbase	1560 mm
Fuel Capacity	23 liters
Dry Weight	215 kg
Power	160 hp (118 kW) @ 8750 rpm
Torque	140 Nm @ 6750 rpm
Front Brake	2 x 320 mm discs, 4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Traction Control	MTC (Motorcycle Traction Control)
Seat Height	860/875 mm
Tires Front	120/70 R19
Tires Rear	170/60 R17