KTM 1290 Super Adventure S 2018 User Manual

TECHNICAL DATA 23
315
Screw, cable channel M5 5 Nm (3.7 lbf ft)
Screw, cable guide, wheel speed
sensor, rear
M5 3 Nm (2.2 lbf ft)
Screw, chain sliding guard M5 5 Nm (3.7 lbf ft)
Screw, combination instrument M5 4.5 Nm (3.32 lbf ft)
Screw, combination switch, right M5 5 Nm (3.7 lbf ft)
Screw, cover part M5 3.5 Nm (2.58 lbf ft)
Screw, cover part M5x12 3.5 Nm (2.58 lbf ft)
Screw, cover part M5x17 3.5 Nm (2.58 lbf ft)
Screw, cross member for luggage
support
M5 4 Nm (3 lbf ft)
Screw, filler cap M5 3 Nm (2.2 lbf ft)
Screw, foot brake lever stub M5 6 Nm (4.4 lbf ft)
Loctite
®
243™
Screw, fuel level sensor M5 3 Nm (2.2 lbf ft)
Screw, heat guard on main silencer M5 4 Nm (3 lbf ft)
Screw, wind shield M5 3.5 Nm (2.58 lbf ft)
Ground fitting on frame M6 6 Nm (4.4 lbf ft)
Nut, ABS module fastening M6 8 Nm (5.9 lbf ft)
Remaining chassis nuts M6 10 Nm (7.4 lbf ft)
Remaining chassis screws M6 10 Nm (7.4 lbf ft)

KTM 1290 Super Adventure S 2018 Specifications

General

Engine Type	2-cylinder, 4-stroke, V 75°
Displacement	1301 cc
Transmission	6-speed
Final Drive	Chain
Front Suspension	WP semi-active suspension USD Ø 48 mm
Rear Suspension	WP semi-active suspension monoshock
Wheelbase	1560 mm
Fuel Capacity	23 liters
Dry Weight	215 kg
Power	160 hp (118 kW) @ 8750 rpm
Torque	140 Nm @ 6750 rpm
Front Brake	2 x 320 mm discs, 4-piston calipers
Rear Brake	267 mm disc, 2-piston caliper
ABS	Bosch 9ME Combined ABS
Traction Control	MTC (Motorcycle Traction Control)
Seat Height	860/875 mm
Tires Front	120/70 R19
Tires Rear	170/60 R17