11 SERVICE WORK ON THE CHASSIS 47
11.17 Installing the front fender
102162-10
Main work
–
Position the front fender. Mount and tighten screws
and
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Finishing work
– Install the start number plate. ( p. 46)
11.18 Removing the shock absorber
Preparatory work
– Raise the motorcycle with a lift stand. ( p. 39)
K00221-10
Main work
– Remove the cable ties.
–
Remove screws
with the washers.
–
Take off frame protector
on both sides.
S00701-10
–
Remove screw
and fitting
.
Info
Raise the wheel slightly to make it easier to remove the screw.
S00702-10
–
Remove screws
.
– Pull off foot brake cylinder from the push rod.
To Next Page
Loading...
Need help?
General
