11 SERVICE WORK ON THE CHASSIS 53
11.28 Sealing the air filter box
Preparatory work
– Remove the air filter box cover. ( p. 50)
S00847-10
Main work
–
Seal the air filter box in the marked area
.
Finishing work
– Install the air filter box cover. ( p. 51)
11.29 Removing the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down before performing any work on the vehicle.
102180-10
–
Disconnect spring
.
Spring hook (50305017000)
–
Remove screws
and take off the main silencer.
11.30 Installing the main silencer
102180-11
– Position the main silencer.
–
Mount screws
, but do not tighten yet.
–
Attach spring
.
Spring hook (50305017000)
–
Tighten screws
.
Guideline
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
11.31 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper "burns" out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
– Remove the main silencer. ( p. 53)
To Next Page
Loading...
Need help?
General
