CONTROLS (ALL EXC/XC-W MODELS) 16
– Press the button for 3 - 5 seconds.
The settings are stored and the setup menu is closed.
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the setup menu
closed.
6.5Setting the clock
Condition
The motorcycle is stationary.
400330-01
– Press the button briefly and repeatedly until CLK appears at the bottom right of
the display.
– Press the button for 3 - 5 seconds.
The hour display flashes.
– Set the hour display with the button and/or button .
– Press the button briefly.
The next segment of the display flashes and can be set.
– You can set the following segments in the same way as the hours by pressing
the button and the button .
Info
The seconds can only be set to zero.
– Press the button for 3 - 5 seconds.
The settings are stored and the setup menu is closed.
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the setup menu
closed.
6.6Adjusting speedometer functions
Info
In its condition at delivery, the display mode SPEED/H and SPEED/ODO is activated.
Condition
The motorcycle is stationary.
400318-01
– Press the button briefly and repeatedly until H appears at the bottom right of the
display.
– Press the button for 3 - 5 seconds.
The setup menu is displayed and the active functions shown.
– Switch to the function you require by briefly pressing the button .
The selected function flashes.
Activating a function
– Press the button .
The icon remains in the display and the display changes to the next func-
tion.
Deactivating a function
– Press the button .
The icon disappears from the display and the display changes to the next
function.
– Activate or deactivate all functions accordingly
– Press the button for 3 - 5 seconds.
The settings are stored and the setup menu is closed.
To Next Page
Loading...
Need help?
General
