EasyManuals Logo
Home>KTM>Motorcycle>250 XC EU 2010

KTM 250 XC EU 2010 User Manual

KTM 250 XC EU 2010
140 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
CONTROLS (ALL EXC/XC-W MODELS) 17
Info
If no button is actuated for 20 seconds or there is no signal from the wheel
speed sensor, then the settings are automatically stored and the setup menu
closed.
6.7Querying the lap time
Info
This function can be called only if lap times are measured.
Condition
The motorcycle is stationary.
400321-01
Press the button briefly and repeatedly until LAP appears at the bottom right of
the display.
Press the button briefly.
LAP 1 appears on the left side of the display.
Laps 1-10 can be displayed by pressing the button .
The button has no function
Press the button briefly.
Next display mode
Info
If an impulse is received from the wheel speed sensor, the left side of the
display changes back to the SPEED mode.
6.8Display mode SPEED (speed)
400317-02
Press the button briefly and repeatedly until SPEED appears on the left side of
the display.
The current speed is displayed in the SPEED display mode.
The current speed can be displayed in Km/h or Mph.
Info
Making the setting according to the country.
When an impulse comes from the front wheel, the left side of the speedometer
display changes to the SPEED mode and the current speed is shown.
6.9Display mode SPEED/H (service hours)
400316-01
Condition
The motorcycle is stationary
Press the button briefly and repeatedly until H appears at the bottom right of the
display.
In display mode H, the service hours of the engine are displayed.
The service hour counter stores the total traveling time.
Info
The service hour counter is necessary for ensuring that maintenance work is car-
ried out at the right intervals.
If the speedometer is in H display mode at the start of the journey, it automati-
cally changes to the ODO display mode.
The H display mode is suppressed during the journey.
Press the button . No function
Press the button . No function
Press the button
for 3 - 5 seconds.
The display changes to the Setup menu of the speedometer
functions.
Press the button
briefly.
Next display mode

Table of Contents

Other manuals for KTM 250 XC EU 2010

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KTM 250 XC EU 2010 and is the answer not in the manual?

KTM 250 XC EU 2010 Specifications

General IconGeneral
BrandKTM
Model250 XC EU 2010
CategoryMotorcycle
LanguageEnglish

Related product manuals