GENERAL TIPS AND HINTS ON PUTTING INTO OPERATION 28
Info
Check the air filter approx. every 30 minutes.
600869-01
– Mount the dust cover for the air filter.
Dust cover for air filter (59006019000)
Info
Follow the KTM PowerParts mounting instructions.
600871-01
– Mount the sand cover for the air filter.
Sand cover for air filter (59006022000)
Info
Follow the KTM PowerParts mounting instructions.
– Adjust the carburetor jetting and setting.
Info
The recommended carburetor tuning is available from your authorized KTM
workshop.
600868-01
– Clean the chain.
Chain cleaner ( p. 132)
– Mount the steel sprocket.
Tip
Do not lubricate the chain.
– Clean the radiator fins.
– Carefully align bent radiator fins.
8.5Preparations for riding on wet sand
600872-10
– Check the radiator cap.
Value on radiator cap 1.8 bar (26 psi)
» If the value displayed does not meet specifications:
Warning
Danger of scalding During motorcycle operation, the coolant gets
very hot and is under pressure.
– Do not remove the radiator cap, radiator hoses or other cooling
system components when the engine is hot. Allow the engine
and cooling system to cool down. In case of scalding, rinse
immediately with lukewarm water.
– Change the radiator cap.
–
Seal the air filter box. x
Tip
Seal the air filter box at the edges to prevent dirt from entering.
–
Clean the air filter. x ( p. 82)
Info
Check the air filter approx. every 30 minutes.
To Next Page
Loading...
Need help?
General
