KTM 250 XC EU 2010 User Manual

MAINTENANCE WORK ON CHASSIS AND ENGINE 50
B00021-10
(XC)
– Loosen screws . Remove the fork leg on the left.
– Loosen screws . Remove the fork leg on the right.
11.26Installing the fork legs x
B00018-10
– Position the fork legs.
Info
The topmost sunk nut in the fork leg must be flush to the upper edge of the
upper triple clamp.
Position bleeder screws  toward the front.
100804-11
(EXC EU/AUS)
– Tighten screws .
Guideline
Screw, top triple clamp M8 20 Nm
(14.8 lbf ft)
– Tighten screws .
Guideline
Screw, bottom triple clamp M8 15 Nm
(11.1 lbf ft)
100803-11
(EXC SIX DAYS, XC‑W)
– Tighten screws .
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
– Tighten screws .
Guideline
Screw, bottom triple clamp M8 12 Nm
(8.9 lbf ft)
B00021-11
(XC)
– Tighten screws .
Guideline
Screw, top triple clamp M8 17 Nm
(12.5 lbf ft)
– Tighten screws .
Guideline
100802-11
– Position the brake caliper and mount and tighten screws .
Guideline
Screw, front brake caliper M8 25 Nm
(18.4 lbf ft)
Loctite
®
243™
(EXC, EXC SIX DAYS, XC-W)
– Mount cable binder .
– Position the brake line and wiring harness. Put on the clamp and mount and
tighten screws .

KTM 250 XC EU 2010 Specifications

General

Brand	KTM
Model	250 XC EU 2010
Category	Motorcycle
Language	English