KTM 250 XC TPI User Manual

16 TUNING THE ENGINE
110
16.6 Plug-in connector of ignition timing map adjustment
V01720-10
Plug-in connector
1
of the ignition timing map adjustment is
located on the frame under the fuel tank.
Possible states
• Soft – The plug-in connector of the ignition timing map
adjustment is disconnected to achieve better rideability.
• Performance – The plug-in connector of the ignition timing
map adjustment is joined to achieve higher performance.
16.7 Changing the ignition timing map
Preparatory work
– Remove the seat. ( p. 59)
– Remove the fuel tank. ( p. 65)
V01720-10
Switching the ignition timing map from Performance to Soft
–
Disconnect plug-in connector
1
of the ignition timing
map adjustment.
Soft – better rideability
Switching the ignition timing map from Soft to Performance
–
Join plug-in connector
1
of the ignition timing map
adjustment.
Performance – better performance
Finishing work
– Install the fuel tank. ( p. 67)
– Mount the seat. ( p. 59)

KTM 250 XC TPI Specifications

General

Brand	KTM
Model	250 XC TPI
Category	Motorcycle
Language	English