KTM 250 XC TPI User Manual

19 STORAGE
124
Info
Do not use non-porous materials since they prevent
humidity from escaping, thus causing corrosion.
Avoid running the engine for a short time only. Because
the engine will not warm up sufficiently, the water
vapor produced during combustion will condense, caus-
ing engine parts and the exhaust system to rust.
19.2 Preparing for use after storage
401059-01
– Install the 12 V battery. ( p. 96)
– Remove the motorcycle from the lift stand. ( p. 47)
– Perform checks and maintenance measures when preparing for
use. ( p. 27)
– Make a test ride.

KTM 250 XC TPI Specifications

General

Displacement	249 cc
Bore x Stroke	66.4 mm x 72 mm
Transmission	6-speed
Starter	Electric starter
Front Brake	Disc brake, 260 mm
Rear Brake	Disc brake, 220 mm
Engine Type	2-stroke
Fuel System	TPI (Transfer Port Injection)
Frame	Central Tube Frame, Made of Chrome Molybdenum Steel
Front Suspension	WP Xplor 48, USD fork
Rear Suspension	WP XPLOR Shock with Linkage
Fuel Capacity	8.5 liters