7 PREPARING FOR USE
24
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
– Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
– Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
– In the event of scalding, rinse the area
affected immediately with lukewarm water.
– Change the radiator cap.
M01106-01
– Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.
600868-01
– Clean the chain.
Chain cleaner ( p. 136)
– Mount the steel sprocket.
– Grease the chain.
Universal oil spray ( p. 137)
– Clean the radiator fins.
– Straighten the bent radiator fins carefully.
Condition
Regular use in sand
– Change the piston every 10 operating hours.
7.7 Preparing the vehicle for riding on wet and muddy circuits
M01106-01
– Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the fitting instructions for KTM PowerParts.
To Next Page
Loading...
Need help?
General
