14 ELECTRICAL SYSTEM
100
14.5 Changing the fuses of individual power consumers
Info
The fuse box containing the fuses of individual power consumers is located under the seat.
Preparatory work
– Press and hold the switch-off button while the engine is
idling until the engine stops.
– Remove the seat. ( p. 59)
V01676-10
Main work
–
Open fuse box cover
1
.
– Remove the faulty fuse.
Guideline
Fuse 1 - 10 A - EFI control unit, oil pump, electronic fuel
injection, diagnostics connector
Fuse 2 - not assigned
Fuse 3 - not assigned
Fuse 4 - 5 A - fuel pump
Fuses SPARE - 10 A/5 A - spare fuse
Info
A faulty fuse has a burned-out fuse wire
A
.
Warning
Fire hazard Incorrect fuses overload the electrical sys-
tem.
– Only use fuses with the required ampere value.
– Do not bypass or repair fuses.
– Insert spare fuse with the correct rating.
Fuse (75011088010) ( p. 130)
Fuse (75011088005) ( p. 130)
Tip
Insert a spare fuse in the fuse box so that it is available
if needed.
– Check that the power consumer is functioning properly.
–
Close the fuse box cover
1
.
Finishing work
– Mount the seat. ( p. 59)
To Next Page
Loading...
Need help?
General
