SERVICE WORK ON THE CHASSIS 11
67
F01538-10
–
Detach spring
1
.
Spring hook (50305017000C1)
–
Remove screws
2
with the washers and take off the silencer.
11.29 Installing the silencer
F01538-11
– Position the silencer.
–
Mount screws
1
with the washers, but do not tighten yet.
–
Attach spring
2
.
Spring hook (50305017000C1)
–
Tighten screws
1
.
Guideline
Remaining screws,
chassis
M6 10 Nm (7.4 lbf ft)
11.30 Changing the glass fiber yarn filling of the main silencer
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
– Allow the exhaust system to cool down before performing any work on the vehicle.
Info
Over time, the fibers of the glass fiber yarn escape and the damper “burns” out.
Not only is the noise level higher, the performance characteristic changes.
Preparatory work
– Remove the silencer. ( p. 66)
To Next Page
Loading...
Need help?
General
