Kubota B2650 User Manual

33OPERATING THE TRACTOR
[B2650/B3350 only]
[B3350SU only]
BRange Gear Shift Lever (L-M-H)
The range gear shift can only be shifted when tractor is
completely stopped.
Do not force the range gear shift lever.
A If it is difficult to shift the range gear shift lever into the
neutral position;
(1) Depress the brake pedal firmly for several
seconds.
(2) Without reducing the brake pedal force, shift the
range gear shift lever.
A If it is difficult to shift the range gear shift lever into "L",
"M" or "H" from neutral position;
(1) Slightly depress the speed control pedal to rotate
the gears inside of transmission.
(2) Release the speed control pedal to neutral
position.
(3) Shift the range gear shift lever.
A To avoid damage of transmission, stop tractor before
shifting between ranges.
4. Raise the implement.
(See "HYDRAULIC UNIT" section)
(1) Position control lever (A) "UP"
(1) Hydraulic control lever (A) "UP"
5. Selecting the Travel Speed.
(1) Range gear shift lever
(L-M-H)
(H) "HIGH"
(M) "MIDDLE"
(L) "LOW"
(N) "NEUTRAL POSITION"

Kubota B2650 Specifications

General

Engine Type	Diesel
Transmission Type	Hydrostatic
3-Point Hitch	Category I
Type	Compact utility tractor
Fuel Type	Diesel
Drive	4WD
Hydraulic System	Open center
Number of Gears	3-range