EasyManuals Logo

Kubota B2650 User Manual

Kubota B2650
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #63 background imageLoading...
Page #63 background image
43PTO
BPTO Clutch Lever
1. The PTO clutch lever engages or disengages the PTO
clutch which gives the PTO independent control.
2. Shift the lever to "ON" to engage the PTO clutch. Shift
the lever to "OFF" to disengage the PTO clutch.
A To avoid shock loads to the PTO, reduce engine
throttle from high idle to low idle by pushing up on
engine throttle when engaging the PTO, then open the
throttle to the recommended engine rpm.
A To avoid damage to PTO clutch and implement, shift
the PTO clutch lever slowly, when engaging the PTO
clutch. Do not keep the PTO clutch lever half way.
A To avoid damage of transmission, when PTO select
lever is not smoothly shifted, slightly shift PTO clutch
lever.
A To avoid damage of transmission, do not shift PTO
select lever until the PTO has stopped completely.
A Tractor engine will not start if the PTO clutch lever is in
the engaged "ON" position.
A When you stand up from the seat with the PTO clutch
lever in the "ON" position, the engine will stop
regardless of the position of the PTO select lever.
This is because the tractor is equipped with Operator
Presence Control (OPC) system.
BPTO Clutch Lever
1. The tractor has a 540 rpm speed position.
2. Shift the lever to "ON" to engage the PTO clutch. Shift
the lever to "OFF" to disengage the PTO clutch.
A To avoid shock loads to the PTO, reduce engine
throttle from high idle to low idle by pushing up on
engine throttle when engaging the PTO, then re-
engage the engine to high idle.
A To avoid damage to PTO clutch and implement, shift
the PTO clutch lever slowly, when engaging the PTO
clutch. Do not keep the PTO clutch lever half way.
A Tractor engine will not start if the PTO clutch lever is in
the engaged "ON" position.
A When you stand up from the seat with the PTO clutch
lever in the "ON" position, the engine will stop
regardless of the position of the PTO select lever.
This is because the tractor is equipped with Operator
Presence Control (OPC) system.
(1) PTO clutch lever "ON" "ENGAGE"
"OFF" "DISENGAGE"
Model [B3350SU]
(1) PTO clutch lever "ON" "ENGAGE"
"OFF" "DISENGAGE"
B3350SU
Engine speed rpm 2398
Shaft 6-spline
PTO speed rpm 540

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kubota B2650 and is the answer not in the manual?

Kubota B2650 Specifications

General IconGeneral
Engine TypeDiesel
Transmission TypeHydrostatic
3-Point HitchCategory I
TypeCompact utility tractor
Fuel TypeDiesel
Drive4WD
Hydraulic SystemOpen center
Number of Gears3-range

Related product manuals