Kubota BX2380 User Manual

Model BX1880 BX2380 BX2680
Dimensions
Wheel base
1400 mm
(55.1 in.)
Min. ground clearance
148 mm
(5.8 in.)
166 mm
(6.5 in.)
Tread
Front
930 mm
(36.6 in.)
Rear
820 mm
(32.2 in.)
Weight (with ROPS)
606 kg
(1336 lbs.)
660 kg
(1455 lbs.)
690 kg
(1521 lbs.)
Clutch N/A
Traveling system
Tire
Front Turf/Bar/
industrial
16x7.50-8 18x8.50-10
Rear Turf/Bar/
industrial
24x12.00-12 26x12.00-12
Steering Hydrostatic type power steering
Transmission Main: Hydrostatic transmission, High-Low gear shift (2 forward, 2 reverse)
Brake Wet disk type
Min. turning radius
2.3 m
(7.5 ft)
Hydraulic unit
Hydraulic control system Directional control, auto-return lever system
Pump capacity
23.5 L/min.
(6.2 gals/min)
System pressure
12.3 MPa to 12.8 MPa
(126 kgf/cm to 130 kgf/cm)
[1790 psi to 1850 psi]
3-point hitch SAE Category 1
Max. lift force
*3
At lift points
5120 N to 5390 N
(1
151 lbs. to 1213 lbs.)
24in. behind lift
points
3040 N
(680 lbs.)
Remote control
valve coupler
(rear: Option)
System 2 valves
Coupler ISO 7241-1 series A
Remote control
valve coupler
(front: Option)
System 2 valves
Coupler (fitting) ISO 7241-1 series B
PT
O
Rear PTO
SAE 1-3/8, 6 splines
Revolution STD (540 rpm)
Mid PTO
USA No.5 (KUBOTA 10-tooth) involute spline
Revolution STD (2500 rpm)
The company reserves the right to change the specifications without notice.
*1 Manufacturer's estimate
*2 SAE J1995
*3 See and check IMPLEMENT LIMITATION TABLES on page 22.
SPECIFICATIONS
20
BX1880, BX2380, BX2680

Kubota BX2380 Specifications

General

Engine Model	D902
Displacement	54.8 cu in (0.9 L)
Engine Power	23 hp (17.2 kW)
PTO Power	17.7 hp (13.2 kW)
Transmission	Hydrostatic
Drive	4WD
Fuel Capacity	6.6 gal (25 L)
Hydraulic System	Open center
3-Point Hitch	Category I
Lift Capacity at 24"	680 lbs (308 kg)
Tire Size (Front)	18x8.5-10
Tire Size (Rear)	26x12-12
Engine Type	3-cylinder diesel
Wheelbase	55.1 in (1400 mm)
Weight	1433 lbs (650 kg)