29OPERATING THE TRACTOR
STARTING
BOperator's Seat
To avoid personal injury:
A Make adjustments to the seat only while the
tractor is stopped.
A Make sure that the seat is completely secured
after each adjustment.
A Do not allow any person other than the driver to
ride on the tractor.
C Travel adjustment
Pull up the position adjust lever and slide the seat
backward or forward, as required. The seat will lock in
position when the lever is released.
A After adjusting the operator's seat, be sure to check
that the seat is properly locked.
A See "REVERSING THE SEAT" Section when using
seat in backhoe position.
BSeat Belt
To avoid personal injury:
A Always use the seat belt when the ROPS is
installed.
Do not use the seat belt if a foldable ROPS is
down or there is no ROPS.
Adjust the seat belt for proper fit and connect to the
buckle. The seat belt is auto-locking retractable type.
BHead Light Switch
(A) ...... Head lights "ON".
(B) ...... Head lights "OFF".
BHazard Light Switch
When hazard light switch is turned counter-clockwise, the
hazard lights flash along with the indicator on the
instrument panel. Turn the switch clockwise to turn off the
light.
(A) ...... Hazard lights "ON".
(B) ...... Hazard lights "OFF".
1. Adjusting the operator's position.
(A) "TRACTOR DRIVING POSITION"
(B) "BACKHOE POSITION"
(1) Seat
(2) Position adjust lever (A) "PULL UP"
(1) Seat belt
2. Selecting Light Switch Positions.
To Next Page
Loading...
Need help?
General
