HYDRAULIC UNIT48
4. Place the protective cap on the coupler of the backhoe
inlet hose, the coupler of the outlet hose, and power
beyond hose.
5. Connect the tractor outlet hose to the coupler of power
beyond pipe.
6. Place the protective cap on the nipple of the tractor
return pipe.
A When getting ready to use the backhoe after finishing
mowing, connect the hoses of the tractor and backhoe
in reverse order.
MOWER LIFT LINKAGE SYSTEM
BCutting Height Control Dial
When mounting the Mid-mount mower, turn the cutting
height control dial to the desired height.
For further details, refer to the operator's manual of
ROTARY MOWER RCK60B-23BX, RCK54P-23BX and
RCK54-23BX.
When operating the tractor without Mid-mount mower:
1. Move the hydraulic lever rearward to raise the mower
rear links to the highest position.
2. Set the cutting height control dial to "TOP" position.
If this is not done, damage of the mower rear link can
result.
(1) Outlet hose (tractor)
(2) Power beyond pipe (tractor)
(A) To be connected
(1) Cutting height control dial
(2) Hydraulic control lever
(1) Mower rear link
To Next Page
Loading...
Need help?
General
