Kubota U20-3 User Manual

U20-3, U25-3 WSM Machine body (Mechanism section)
II-M-2
A.Specifications
a. Specifications
NOTE:
• Above dimensions are based on the machine with JPN bucket.
JPN = made in Japan
• Above dimensions are based on the machine with rubber tracks.
• Specifications subject to change without notice.
KUBOTA EXCAVATOR
Model name U20-3 U25-3
Type canopy cabin canopy cabin
Machine weight kg 2030 2120 2460 2540
Standard
bucket
Volume (CECE) m
3
0.056 0.064
width (with side cutter) mm 450 500
Engine
Type
(water cooled 4 cycle Diesel)
3 cylinder 3 cylinder
Model name
KUBOTA
D1105-EBH-10
KUBOTA
D1105-EBH-11
Total displacement cm
3
1123 1123
Output (ISO 9249) kW 14.0 15.5
Rated speed rpm 2200 2400
Performance
Swing speed rpm 9.6 9.8
Travel speed km/h 2.2/4.2 2.5/4.5
Ground pressure
kPa (kgf/cm
2
)
25.1
(0.26)
26.6
(0.27)
22.9
(0.23)
24.0
(0.24)
Climbing angle %(deg) 36 (20) 36 (20)
Dozer (width & height) mm 1400 X 292 1500 X 292
Boom swing
angle
left rad (deg) 1.31 (75) 1.31 (75)
Right rad (deg) 0.96 (55) 0.96 (55)
Pressure
connection for
attachments
Max. displacement L/min 35.8 48.0
Max. pressure
MPa (kgf/cm
2
)
21.6 (220)
Fuel tank capacity L 28 28

Kubota U20-3 Specifications

General

Brand	Kubota
Model	U20-3
Category	Excavators
Language	English