KYMCO G-DINK 300i Service Manual

9. FINAL REDUCTION
9-8
G-Dink 300i
After installation, fill the transmission case
with the specified oil.
Specified Gear Oil: SAE90#
Oil Capacity:
At disassembly : 0.2 liter
At change : 0.18 liter
Install and tighten the oil check bolt.
Torque: 7.8～11.8N-m
Start the engine and check for oil leaks.
Check the oil level from the oil check bolt
hole and add the specified oil to the proper
level if the oil level is low.
• Place the motorcycle on its main stand
on level ground.
• Check the oil-sealing washer for wear
or damage.
＊
Drain Bol
t
Oil Check Bolt Hole/Oil Fille
r

KYMCO G-DINK 300i Specifications

General

Brand	KYMCO
Model	G-DINK 300i
Category	Scooter
Language	English