KYMCO G-DINK 300i Service Manual

12. COOLING SYSTEM
12-3
G-DINK 300i
COOLING SYSTEM TESTING
RADIATOR CAP INSPECTION
Install the radiator cap onto the radiator
tester and apply specified pressure to it. It
must hold specified pressure for at least six
seconds.
Radiator Cap Relief Pressure:
0.9±0.15 kg/cm²
Install the radiator tester onto the radiator
and apply specified pressure to it. It must
hold specified pressure for at least six
seconds.
Check the water hoses and connectors for
leaks.
RADIATOR
RADIATOR INSPECTION
Remove the front cover.
Apply water to the sealing cap surface
before testing.
＊
Radiator Cap
Radiator Teste
r
The test pressure should not exceed
1.05 kg/cm². Excessive pressure can
damage the radiator and its hose
connectors.
＊

KYMCO G-DINK 300i Specifications

General

Brand	KYMCO
Model	G-DINK 300i
Category	Scooter
Language	English