KYMCO G-DINK 300i Service Manual

6. CYLINDER HEAD/VALVES
9-6
G-Dink 300i
CAMSHAFT
REMOVAL
Turn the A.C. generator flywheel so that the
“T” mark on the flywheel aligns with the
index mark on the right crankcase cover
Hold the round hole on the camshaft gear
facing up and the location is the top dead
center on the compression stroke.
Remove the cam chain tensioner lifter sealing
bolt.
Turn the cam chain tensioner screw
clockwise to pull the tensioner rod all the way
in.
Remove the four cap nuts attaching the
camshaft holder.
Cam Chain Tensione
r
Round Hole
Camshaft Holde
r
Cap Nuts
Tensioner Screw
• Diagonally loosen the cylinder head
cap nuts in 2 or 3 times.
＊
6-6

KYMCO G-DINK 300i Specifications

General

Brand	KYMCO
Model	G-DINK 300i
Category	Scooter
Language	English