KYMCO G-DINK 300i Service Manual

13. FUEL INJECTION SYSTEM
13-21
G-DINK 300i
INSPECTION
Disconnect and remove the ECU from the
frame.
Check for continuity between pin 9 and 10
of the ECU side connector.
There should be continuity at all times.
Check for continuity between each pins 2, 4
and 23 of the ECU side connector.
There should be continuity at all times.
Check for continuity between pin 24 and 10
of the ECU side connector.
There should be no continuity at all times.
ECU PIN FUNCTION

KYMCO G-DINK 300i Specifications

General

Brand	KYMCO
Model	G-DINK 300i
Category	Scooter
Language	English