KYMCO MXU 500 User Manual

3. INSPECTION/ADJUSTMENT
3-6
MXU 500
3. Loosen the screw (3) and remove the air
cleaner assembly (4) from the air cleaner
housing.
4. Unscrew the clamp (5)
5. Remove the outer air cleaner (7).
6. Remove the screw/washers (6) and
remove the air cleaner assembly from the
air cleaner holder (8).
7. Remove the inner air cleaner (9) and air
cleaner screen (10) from the air cleaner
guide (11).
8. Remove the air cleaner screen from the
inner air cleaner.
CLEAN AIR FILTER ELEMENT
Wash the element gently, but throughly in
solvent.
Squeeze the excess solvent out of the
element and let dry.
Apply the engine oil.
Squeeze out the excess oil.
More frequent replacement is required when
riding in unusually dusty or rainy areas.
(7) (8) (9) (10) (11)
Use parts cleaning solvent only. Neve
r
use gasoline or low flash point solvents
which may lead to a fire or explosion.
＊
Do not twist or wring out the foa
m
element. This could damage the foam
material.
＊
The element should be wet but not
dri
pp
in
g
.
＊

KYMCO MXU 500 Specifications

General

Brand	KYMCO
Model	MXU 500
Category	Offroad Vehicle
Language	English