5. FUEL SYSTEM
5-4
MXU 500
FUEL TANK
REMOVAL
Remove the seat, right and left side frame
cover and fuel tank cover (refer to the
“FRAME COVERS” section in the chapter
2).
Switch the fuel valve “OFF”.
Remove the 2 mounting bolts.
Disconnect the fuel tube from carburetor.
Disconnect the fuel unit connectors.
Remove the two bolts and two nuts from the
fuel tank, then remove the fuel tank.
INSTALLATION
Fuel tank installation is in the reverse order
of removal.
FUEL VALVE
REMOVAL
Remove the screw and then remove control
switch.
Disconnect all fuel tubes and remove the two
screws, then remove fuel valve.
Warnin
Fuel Tube
xKeep sparks and flames away from the
work area.
xWipe off any spilled gasoline.
Control Switch
Fuel Tube
Fuel Tubes
Fuel Valve
Fuel Unit Connectors
xKeep sparks and flames away from the
work area.
xDrain gasoline into a clean container.
＊
To Next Page
Loading...
Need help?
General
