3. INSPECTION/ADJUSTMENT
3-5
MXU 500
SPEED LIMITER
The speed limiter keeps the throttle from
fully opening, even when the throttle lever
is pushed to the maximum. Screwing in the
adjuster limits the maximum engine power
available and decreases the maximum speed
of the ATV.
Speed limiter length (A): 13 mm (0.52 in)
Adjustment
1. Loosen the lock nut (1).
2. Turn the adjuster (2) in or out until the
specified speed limiter length is obtained.
Turning in:
Speed limiter length is decreased.
Turning out:
Speed limiter length is increased.
3. Tighten the lock nut.
AIR CLEANER
AIR CLEANER REPLACEMENT
1. Remove the seat (refer to the “FRAME
COVERS” section in the chapter 2).
3. Unlatch the six retainer clips (1) and
remove the air cleaner housing cover (2).
To Next Page
Loading...
Need help?
General
