KYMCO X-Town 300 User Manual

INSTRUMENTS
CONTROLS & FEATURES
Speedometer: Indicates the road speed in
Km/h (kilometers per hour).
Coolant temperature gauge
Turn Signal Indicator Light: Flashes when
either turn signal is being used.
Odometer/Trip meter: Press the mode button
to toggle between the overall and trip mileage,
or to reset the trip meter.
˙Press the “MODE” button to enter the ODO,
Trip A/B, Oil Service or Empty mode.
˙Press the “RESET” button for 3 seconds to
reset on the Trip A/B, Oil Service mode.
˙Press the “MODE” and “RESET” buttons for
3 seconds to set the unit of km/h or MPH.
Clock
Fuel Warning Indicator “ “: This indicator
lights when the fuel tank is near empty to alert
the rider to refill the fuel tank as soon as
possible.
High Beam Indicator Light: This light is
illuminated when the headlight high beam is
on.
Tachometer: Indicates the engine speed in
the revolutions per minute (RPM)
MODE
FUNC
RESET
1
2
2
2
3
2
3
2
4
2
5
2
6
2
8
2
7
2
2
2

KYMCO X-Town 300 Specifications

General

Cooling System	Liquid cooled
Maximum Torque	22.5 Nm @ 6500 rpm
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shocks
Front Brake	Disc
Rear Brake	Disc
Front Tire	120/70-15
Seat Height	800 mm
Width	800 mm
Fuel Capacity	12.5 Liters
Engine Type	4-stroke, single cylinder
Fuel System	Electronic Fuel Injection