KYMCO X-Town 300 User Manual

CONTROLS & FEATURES
Suspension
Each shock absorber on your scooter has 5 spring
preload adjustment positions for different load or
riding conditions.
Use a fitting wrench to turn the adjuster’s boss ① .
Position 1 is for light loads and smooth road
conditions.
Position 3 to 5 increase spring preload for a more
stiff rear suspension and can be used under heavy
loading.
▆NOTE: Always adjust the shock absorber pre-load position in
sequence (1-2-3-4-5 or 5-4-3-2-1).
Attempting to adjust directly from 1 to 5 or 5 to 1 may damage
the shock absorber.
Standard spring preload position: 3
22
WARNING
Be certain to adjust both shock absorbers
to the same spring preload positions.
Improper setting of shock absorber will
cause unstable handling and might lead
to an accident.
①

KYMCO X-Town 300 Specifications

General

Cooling System	Liquid cooled
Maximum Torque	22.5 Nm @ 6500 rpm
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shocks
Front Brake	Disc
Rear Brake	Disc
Front Tire	120/70-15
Seat Height	800 mm
Width	800 mm
Fuel Capacity	12.5 Liters
Engine Type	4-stroke, single cylinder
Fuel System	Electronic Fuel Injection