KYMCO X-Town 300 User Manual

CONTROLS & FEATURES
The battery voltage
Display the prompt battery voltage to get the
information without need to check battery directly.
The ambient temperature mode
Display the surrounding temperature, Press the
“FUNC” and “RESET” buttons for 3 seconds to
select the unit of “°C“ Celsius or “°F” Fahrenheit.
The oil service trip meter
Display the accumulated driving distance from the
previous reset after the oil service.
Press the “RESET” button for 3 seconds to reset the
oil service indicator and the oil service trip meter.
The Fi error code indicator
Display the error code of fuel injection
system. If appear any error codes and
display continuously, have the KYMCO
authorized dealer check the vehicle.
▆NOTE: If any error codes show up for a moment
then goes off and not repeat, it could result from an
electrical interference.
WARNING
If any error codes always show up, the
vehicle should be checked immediately.
TRIP A
TRIP B
OIL
SERVICE
VOLT
AIR
13
X-Town300

KYMCO X-Town 300 Specifications

General

Cooling System	Liquid cooled
Maximum Torque	22.5 Nm @ 6500 rpm
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shocks
Front Brake	Disc
Rear Brake	Disc
Front Tire	120/70-15
Seat Height	800 mm
Width	800 mm
Fuel Capacity	12.5 Liters
Engine Type	4-stroke, single cylinder
Fuel System	Electronic Fuel Injection