KYMCO X-Town 300 User Manual

Starting the engine
OPERATION
Always follow the proper starting procedure
described here and on the following pages.
CAUTION
To protect the catalytic converter in the engine's
exhaust muffler, avoid idling too long and do not
use leaded gasoline.
CAUTION
To prevent damage to the starter motor, do not
operate the starter motor for more than 5
seconds at a time. If fail to start successfully,
check the fuel level and the battery condition, and
waiting for 15 seconds between each fail to start.
1. Position the motorcycle by the center stand
and put the side stand up.
2. Insert the ignition key and turn it to " ".

KYMCO X-Town 300 Specifications

General

Cooling System	Liquid cooled
Maximum Torque	22.5 Nm @ 6500 rpm
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shocks
Front Brake	Disc
Rear Brake	Disc
Front Tire	120/70-15
Seat Height	800 mm
Width	800 mm
Fuel Capacity	12.5 Liters
Engine Type	4-stroke, single cylinder
Fuel System	Electronic Fuel Injection