EasyManuals Logo

KYMCO X-Town 300 User Manual

KYMCO X-Town 300
69 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #66 background imageLoading...
Page #66 background image
STORAGE
Take necessary steps to be in good condition
for next use after long storage.
Perform any necessary periodic maintenance or
repairs before storage
Exchange new oil after warming up the engine.
Empty the fuel tank and make sure no fuel
remaining by idling until the engine stalls.
Remove the battery and keep from direct
sunlight or freezing temperature, its better to
do a slow charge once a month.
Wash and dry the vehicle thoroughly
Apply corrosion inhibitor to all unpainted metal.
Inflate all tires to the rated pressure and put the
wheel stands to raise tires off the ground.
Cover the vehicle, store indoors and keep dry.
Removal from Storage
Remove cover from the vehicle
Check the battery voltage or charge it if
necessary, and then install it in the vehicle.
Fill the fuel tank with fuel.
Check all the points listed in the Pre-ride
Inspection section.
EMISSION CONTROL
WARNING
Gasoline is easily flammable and
explosive. Its possible to get burned, even
seriously injured when fueling with
carelessness.
Stop the engine and keep away from any
heat source, spark fire, and flames.
Be sure to add fuel outdoors and wipe the
spill up at once.
48

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KYMCO X-Town 300 and is the answer not in the manual?

KYMCO X-Town 300 Specifications

General IconGeneral
Cooling SystemLiquid cooled
Maximum Torque22.5 Nm @ 6500 rpm
TransmissionCVT
Front SuspensionTelescopic fork
Rear SuspensionDual shocks
Front BrakeDisc
Rear BrakeDisc
Front Tire120/70-15
Seat Height800 mm
Width800 mm
Fuel Capacity12.5 Liters
Engine Type4-stroke, single cylinder
Fuel SystemElectronic Fuel Injection

Related product manuals