3. Front and rear brakes:
Check operation; make sure there is no brake
fluid leakage (page 45).
4. Tires:
Check condition and inflation pressure
(page 48).
5. Throttle:
Check for smooth operation and that it can be
closed completely in all steering positions (page
41).
6. Lights and horn:
Check that headlight, tail/brake light, turn
signals, indicators and horn function properly.
7. Steering:
Check for condition and smoothness.
OPERATION
Break-In
The first 1600km (1000 miles) of riding is very
important to the life of usage. Proper break-in
operation during this period will help ensure
maximum life and performance.
The reliability and performance depend on a
special care and limited operation during the
break-in period.
The following limitations should be complied
during the break-in period:
Initial 800km (500 miles):
Less than 1/2 throttle or not over
Up to 1600km (1000 miles):
Less than 3/4 throttle
Vary the engine speed
The engine speed should be varied and not
held constantly for a long time and also
The 1000km (600 miles) initial service
is very important to ensure an optimum
vehicle condition in the future.
To Next Page
Loading...
Need help?
General
