KYMCO X-Town 300 User Manual

Brake fluid
Brake fluid level
inspection
MAINTENANCE
With the scooter in an upright position, check
the front and rear fluid level.
Change the brake fluid at the time specified in
the maintenance schedule.
The fluid level should be above the lower level
line①. If the fluid level is below the lower level
mark "L", check over the worn brake pad or
leakage.
▆NOTE: Make sure there is no fluid leaking. Check for
fluid deterioration or crack on the brake hoses and fittings.
Brake fluid type: DOT- 4
WARNING
∎Use only DOT4 brake fluid from a
sealed container.
∎Clean the filler cap before removing.
1
2
38

KYMCO X-Town 300 Specifications

General

Cooling System	Liquid cooled
Maximum Torque	22.5 Nm @ 6500 rpm
Transmission	CVT
Front Suspension	Telescopic fork
Rear Suspension	Dual shocks
Front Brake	Disc
Rear Brake	Disc
Front Tire	120/70-15
Seat Height	800 mm
Width	800 mm
Fuel Capacity	12.5 Liters
Engine Type	4-stroke, single cylinder
Fuel System	Electronic Fuel Injection