HP LaserJet Emulation (Mode 6)
7-43
HP LaserJet Reset State
The printing system resets to the following states when it receives a PCL reset command.
Shown in parentheses are the related FRPO parameters.
LaserJet PJL
The HP LaserJet emulation loads a Printer Job Language (PJL) that controls communica-
tion between the printing system and the system. The PJL works for both KPDL and HP
LaserJet emulations. It enables the user to change some default states but, more impor-
tantly, allows current printing system states to be communicated back to the host system.
The Kyocera printing systems described in this manual support only a subset of the HP
PJL commands. To check supported PJL features, see the table that follows.
Table 7.22. HP LaserJet Emulation Reset State
Job control Number of copies 1
Page control Cassette Upper (R4)
Orientation Portrait (C1)
Paper size Installed tray size (R2)
VMI 6 lpi (U0/U1)
HMI 10 cpi
Top margin 50 dots
Text length Paper size – (1/2-inch top + 1/2-inch bottom)
Left margin Left logical
Right margin Right logical
Perforation skip On
Line termination CR=CR, LF=LF, FF=FF
Fonts Font Courier
Symbol set IBM PC-8 (U6/U7)
Underline mode Off
Font management Font id 0
Character code 0
Raster graphics Raster graphics resolution 75
Rectangular area fill Horizontal rectangle size 0
Vertical rectangle size 0
Area fill id 0
Macro Macro id 0
Troubleshooting command End of line wrap Off
Display functions Off
Table 7.23. Supported PJL Commands
Command Group Command Description
Kernel Commands Universal Exit
Language (UEL)
Exits current printer language and returns control to PJL. Reset
the PJL parser to start at the beginning of the line.
COMMENT Tells PJL to accept the command line as a comment.
ENTER Chooses a printer language for processing the current job.
Job Separation
Commands
JOB Informs printing system of the start of a print job, resets the
page count, allows naming of the job, supports non-printing
mode for printing portions of jobs.
EOJ Instructs printing system that the print job is complete, resets
the page count.
To Next Page
Loading...
Need help?
General