Chapter 7 Emulation
7-66
PJL Syntax Comparison
Table 7.27. PJL Syntax Comparison
Suggested Syntax Rules
[ ] Items in brackets “[ . . . ]” indicate optional parameters.
< > Identifies a control code character
Special Identifiers
<HT> Horizontal tab character (ASCII 9).
<LF> Line feed character (ASCII 10).
<CR> Carriage return character (ASCII 13).
<SP> Space character (ASCII 32).
<WS> White space
<ESC> Escape character (ASCII 27).
<FF> Form feed character (ASCII 12).
<Words> Printable characters (ASCII characters 33 through 126) and <WS>
PJL Commands
COMMENT @PJL COMMENT <Words> [<CR>] <LF>
DEFAULT @PJL DEFAULT [LPARM: personality] variable = value [<CR>] <LF>
DINQUIRE @PJL DINQUIRE [LPARM: personality] variable [<CR>] <LF>
Response @PJL DINQUIRE [LPARM: personality] variable <CR> <LF> value <CR> <LF>
<FF>
ECHO @PJL ECHO [<Words>] [<CR>] <LF>
Response @PJL ECHO [<Words>] <CR> <LF> <FF>
ENTER @PJL ENTER LANGUAGE = personality[<CR>] <LF>
EOJ @PJL EOJ [NAME = job name] [<CR>] <LF>
INFO @PJL INFO read only variable [<CR>] <LF>
Response @PJL INFO read only variable <CR> <LF> [1 or more lines of printable characters or
<WS> followed by <CR> <LF>]<FF>
INITIALIZE @PJL INITIALIZE [<CR>] <LF>
INQUIRE @PJL INQUIRE [LPARM: personality] variable [<CR>] <LF>
Response @PJL INQUIRE [LPARM: personality] variable <CR> <LF> value <CR> <LF> <FF>
JOB @ PJL JOB [NAME = “job name”] [START
OPMSG @PJL OPMSG DISPLAY = “message” [<CR>] <LF>,
RDYMSG @PJL RDYMSG DISPLAY = “message” [<CR>] <LF>,
RESET @PJL RESET [<CR>] <LF>
SET @PJL SET [LPARM: personality] variable = value [<CR>] <LF>,
STMSG @PJL STMSG DISPLAY = “message” [<CR>] <LF>,
Response @PJL STMSG DISPLAY = “message” <CR> <LF>
UEL/SPJL <ESC>%-12345X
USTATUS @PJL USTATUS variable = value [<CR>] <LF>,
Response @PJL USTATUS variable <CR> <LF>
[1 or more lines of printable characters or <WS> followed by <CR> <LF>]<FF>,
USTATUSOFF @PJL USTATUSOFF [<CR>] <LF>
PJL @PJL [<CR>] <LF>
To Next Page
Loading...
Need help?
General