Device Manager
Setting a Status Filter
You can set a status filter.
1
Select All Devices or a device group to filter.
2
In the toolbar, click the Status filter funnel icon.
3
Select a status filter from the list.
List view or Map view displays all devices that have the selected filter.
Show or Hide Unmanaged Devices
You can display or hide printing devices that are not being managed.
1
Select All Devices or a device group.
2
In the toolbar, click Status filter.
3
Select the Show Unmanaged Devices check box in the Status filter list to
display both the managed and unmanaged devices. Clear the check box to
show only the managed devices.
Multi-Set
The Multi-Set wizard lets you send configuration parameters to multiple devices
at once.
Multi-Set lets you configure device settings for a single device, multiple devices
or groups of Kyocera devices listed on the Supported Model List in the release
notes. It does not support all device models.
To start Multi-Set, select a group of devices in the List view or Map view, then
click Multi-Set in the toolbar.
Multi-Set Installation
In the pages of the Multi-Set wizard you can select the following settings:
Device Group
Select the device or group of devices you want to configure.
Multi-Set Settings
Displays device settings, such as Device System Settings and Device User
List. Not all settings are available for some devices. You can only configure one
group of settings at a time.
Multi-Set Source
If you select Copy from source device, then you must select a source device
for the settings from the Select Device page. These settings can be saved as a
Multi-Set template file. If you select Copy from Multi-Set template file, you
must select a Multi-Set template file from the server or from your local client.
Multi-Set template files can be saved from the Multi-Set wizard or created with
the Multi-Set Template Editor tool.
Schedule
3-15 User Guide
To Next Page
Loading...
Need help?
General