Device Manager
Device Properties for a Single Device
Device Properties options lets you view and set the properties of printing
devices. The Properties dialog box displays detailed information about the
selected network device. Some models do not display all options.
Model name and home page
Displays the device display name and IP address. You can click the Device
home page icon to open software on the device.
Printing device image
Displays a 3-D image of the printing device showing installed paper options or
finishers. Some models display a generic image.
Operation Panel
Displays the status of the device.
Refresh
Updates the display for all device properties.
Current Status
Displays the printing device status for the following parameters:
Managed
Indicates whether the printing device is being managed by the application.
When the device is not managed, Status and sysUpTime are blank.
Status
Displays the current status of the printing device, such as Ready, Printing,
or Sleeping.
sysUpTime
Displays the length of time the printing device has been on, in the format:
days, hours, minutes, seconds.
Connection Type
Displays how the device is connected.
Supplies tab
Displays the current level of consumable supplies.
Device Settings tab
Displays all available printing device properties.
Troubleshooting tab
Displays device errors and troubleshooting advice.
Monitoring tab
Lets you set a polling schedule or configures SNMP traps to monitor a device.
Communication tab
A user with privileges can change Simple Network Management Protocol
(SNMP) and Web Services Description Language (WSDL) settings for device
communication.
Device Properties for Multiple Devices
Multiple Device Properties lets you view and set the properties of devices.
Support varies by model.
Options for Multiple Devices
3-21 User Guide
To Next Page
Loading...
Need help?
General