Checking Transmission Results and Registration Status
5-8 OPERATION GUIDE
Printing Administrative Reports
You can print various administrative reports to check the results of fax
transmission or the status of the functional setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax
was sent successfully. You can also print the transmitted image in the send
result report.
1
Press the System Menu key.
2
Press [Report], and [Next] of Result Report Setting. Then press [Next],
[FAX/i-FAX], and [Change] of Send Result Report.
3
Press [Off] (not to
print), [On] (to print),
or [Error Only].
If you selected [On]
or [Error], you should
then indicate
whether the
transmitted image is
to be printed by
selecting [Off] (do
not print transmitted
image) or [On] (print
transmitted image].
4
Press [OK].
5
To exit from this setup, press [Close] several times until the System Menu
default screen is displayed.
Status
Report - FAX/i-FAX
Cancel OK
10/10/2007 10:00
Error Only
Print a report of FAX/i-FAX transmission results.
*Results including E-mail/Folder in multiple destinations are also printed.
On
Off
Attach Send Image
On
Off
To Next Page
Loading...
Need help?
General
Weight and Dimensions
