Kyocera KM-5050 User Manual

Troubleshooting
10-6 OPERATION GUIDE
Troubleshooting
When a problem occurs, first check the following. If the problem persists,
contact your dealer or service representative.
Symptom Checkpoint Corrective Action
Reference
Page
Cannot send document. Is the modular cord
connected correctly?
Connect the modular cord
correctly.
–
Is Communication error
displayed?
Remedy the cause of error
and send again.
Appendix-15
Is TX (transmission)
restriction activated?
Cancel the TX restriction. 6-16
Cannot perform broadcast
transmission.
Is free space available in the
memory?
Send after the memory has
free space, or create free
space in the memory.
4-5
Cannot perform encrypted
communication.
Are the registrations correct
both at sender and recipient?
Double-check the
registrations both at sender
and recipient.
6-26
Cannot use the remote
switching function.
Is a pulse line used? Some phones may transmit
tone signals using buttons.
Refer to the operation
manual of your phone set.
–
Is the remote switching
number correct?
Check the registration.
(Default: 55)
4-14
No print output after
reception.
Is memory forwarding
activated?
Check the forwarding
destination.
–
Cannot receive document. Is the modular cord
connected correctly?
Connect the modular cord
correctly.
–
Is Communication error
displayed?
Remedy the cause of error
and ask the sender to retry.
Appendix-15
Is RX (reception) restriction
activated?
Cancel the RX restriction. 6-24
Cannot perform memory
reception.
Is free space available in the
memory?
Receive after the memory
has free space, or create free
space in the memory.
3-12

Kyocera KM-5050 Specifications

General

electrical requirements	120V, 60Hz, 11.5A
max monthly volume	200, 000 Pages Per Month
warm-up time	Within 30 Seconds
first copy out	3.5 Seconds
pages per minute	50 Letter, 26 Legal, 26 Ledger
system memory	Standard 512MB RAM, upgradeable to 1GB
hard disk drive	Standard 80GB HDD
resolution	600 x 600 DPI
standard paper sources	Dual 500 Sheet Drawers, 200 Sheet MPT
drawer paper size	5.5" x 8.5" - 11" x 17"
paper weight	13-28 lb Bond via Paper Drawers, 13 lb Bond -110 lb Index via MPT
paper size	5.5" x 8.5" – 11" x 17"
paper weight	17 – 20 lb Bond
capacity	100 Sheet DSDP / 50 Letter Size Originals Per Minute
dimensions	22.4”W x 20.7”D x 5.9”H
weight	29 lbs
stack capacity	Main Tray (A): 3, 000 Sheets; Sub Tray (B): 200 Sheets, Sub Tray (C): 50 Sheets
dimensions	26.9"W x 22.2"D x 42.8"H
weight	121 lbs
number of trays	7
dimensions	20.1"W x 15.7"D x 18.5"H
weight	22 lbs
weight	6.6 lbs
dimensions	25.9"W x 17.9”D x 10.5"H
weight	53 lbs
dimensions	22.0"W x 20.7"D x 36.0"H
weight	55 lbs
dimensions	12.2”W x 16.1”D x 6.3”H
weight	19.8 lbs
dimensions	23.0”W x 23.6”D x 12.4”H
weight	50.7 lbs
dimensions	23.0”W x 23.2”D x 12.4”H
weight	57.3 lbs

Weight and Dimensions

dimensions	23.6"W x 25.4"D x 29.3"H
weight	188 lbs