Variable Curvature WST systems presets
Kara
Kara and Karai are different versions of the same enclosure. They share the same factory presets and
recommended loudspeaker congurations.
preset(s)
loudspeaker
conguration
Kara KS28, SB28,
SB18 or KS21*
acoustic properties
line source [KARA] — 55 Hz - 20 kHz
line source +
coupled subwoofer
[KARA] [xxxx_100]
line source +
separated subwoofer
[KARA] [xxxx_60]
down to 32 Hz (SB18),
31 Hz (KS21) or 25
Hz (KS28 or SB28)
reinforced LF contour
single or pair of enclosures [KARA_FI] —
high-pass at 100 Hz
at response
* with subwoofers as a cardioid array, use [xxxx_xx_C] or [xxxx_xx_Cx]
[KARA]
loudspeaker elements outputs channels routing gain delay polarity mute
LF OUT 1 LF ON
HF OUT 2 HF
IN A 0 dB 0 ms +
ON
LF OUT 3 LF ON
HF OUT 4 HF
IN A 0 dB 0 ms +
ON
[KARA_FI]
loudspeaker elements outputs channels routing gain delay polarity mute
LF OUT 1 LF ON
HF OUT 2 HF
IN A 0 dB 0 ms +
ON
LF OUT 3 LF ON
HF OUT 4 HF
IN B 0 dB 0 ms +
ON
Routing, gain, delay, polarity and mute parameters can be modied by the user.
Preset Guide owner's manual (EN) version 16.0 39